Enervex Controls
ENERVEX controls and accessories are designed to ensure safe, reliable, and efficient draft performance in chimney and venting systems. From basic fan speed controls to advanced modulating pressure controllers, ENERVEX products regulate airflow, maintain consistent draft, and protect heating appliances across residential and commercial applications.
Engineered for compatibility with ENERVEX chimney fans and venting systems, these controls help optimize energy usage, improve system performance, and meet required safety standards. Whether for gas-fired, oil-fired, or wood-burning appliances, ENERVEX provides dependable solutions for precise draft and pressure management.
FSC – Fan Speed Control
FSC5 – 5amp Speed Control
FSC8 – 8amp Speed Control
ENERVEX Fan Speed Control FSC is used in conjunction with all single-phased chimney fans. The fan speed control is specially engineered to provide variable speed control of split capacitor motors. The control is accomplished by reducing the line voltage to the motor thereby using only the energy required to maintain the desired volume of air flow (fan speed).
ADC150 Fan Control
The ENERVEX ADC150 is a Modulating Fan Control used with up to 2 appliances to monitor and maintain a constant draft or pressure in a chimney or duct. The ADC150 can be used with models RS, RSHT, and GSV fans. It can control the fan speed directly or via a Variable Frequency Drive (VFD, sold separately). The ADC150 is typically used to control the draft of a gas-fired, sealed fireplace or water heaters.
The ADC150 monitors the draft in a chimney system via a connection to a pressure transducer (XTP2) attached to the chimney, and maintains the draft by modulating the fan speed. It provides a 10-120V AC power to single phase fans and 0-10V DC control signal to control 3-phase fans via a variable frequency drive.
ADC100 Fan Control
Some of the control’s features are:
Appliance safety interlock… Automatic reset…
Manual and automatic fan speed setting…
Integrated damper control function.
ADC100
ADJUSTMENT
ADJUSTMENT
w/ FSC5 Control
The ENERVEX ADC100 Fan Control is used to control draft in simple fireplace systems where modulation is not required. It controls the speed of the fan to maintain proper draft in the chimney. The control can be used with Models RS and GSV, and is typically used to control the draft of a gas-fired fireplace, furnace, stove, BBQ or pizza oven.
The ADC100 comes with an external PDS-1. The PDS is a NO/NC switch that ensures the pressure in the chimney is maintained at or above the internal setting of the switch.
The ADC100 operates a chimney fan at a set speed to create and maintain proper mechanical draft at the outlet of a heating appliance(s). The control provides a 10-120V AC signal to single phase fans, as well as a 0-10V DC signal that can be interpreted to control 3-phase fans by a variable frequency drive.
EFC211 Control
Used with wood-fired heating appliances, the ENERVEX EFC 211 Fan Control features an audible and visual alarm. The EFC 211 control maintains the proper draft by controlling the proper speed of a chimney fan. The EFC 211 is designed for use with an ENERVEX Chimney Fans and is for indoor installation only. It is typically used with either a wood-fired fireplace or stove or a wood-fired pizza-oven in a restaurant kitchen.
NOTE:
The EFC 211 does not have any automatic on/off or provide speed modulation during normal operation.
The EFC 211 is an enhanced manual speed control with an audible and visual alarm to satisfy certain codes.
Listed to UL378. Complies with NFPA211 Standard for Solid-fuel Chimneys and Fireplaces.
PDS-1 Proven Draft Switch
The Proven Draft Switch (PDS1) is used for insufficient draft protection, so if an unsafe draft condition occurs – whether a mechanical or electrical failure – the switch will shut down the heating appliance. It is typically used with gas or oil fired appliances where it can be interlocked with the gas supply valve or the safety or control circuit of the appliance.
EBC 24 and MEC 24 XTP Sensor Upgrade!
As of February 1st, 2024, all EBC 24 and MEC 24 Modulating Fan Controls will include and ship with a bi-directional XTP sensor as standard. It will no longer just be an option.
Enervex has made this upgrade to simplify their offering as the bi-directional XTP can also operate in a unidirectional mode. The operating mode can be selected from the EBC/MEC 24 setup menu.
The unidirectional XTP2 sensors will still be available as spare part
MEC-24 308.0100.1200
Pressure Controller for Multiple Appliances
The MEC24 is typically used to control the pressure in duct systems serving clothes dryers, bathrooms, kitchen hoods and other building venting applications.
EBC-24 305.0100.1200
Modulating Fan Control
The EBC 24 is a multi-use draft or pressure controller used with fans and dampers to monitor and maintain a constant draft or pressure by varying the speed of a fan(s) or the position of an actuator.