GSV & RSV 200 – 450 FAN PARTS
Enervex GSV Fans are designed and UL Listed for commercial kitchen environments where there is a need to pull smoke and exhaust grease laden air.
GSV200-450 Fans spin a back-curved Impeller to move higher volumes of air and/or assist higher static runs and consist of the GSV200, GSV250, GSV315, GSV400 & GSV450
Enervex RSV Fans are designed for mechanical draft support on vent systems serving boilers, water heaters and similar appliances.
RSV200-450 Fans spin a back-curved Impeller to move higher volumes of air and/or assist higher static runs and consist of the RSV200, RSV250, RSV315, RSV400 & RSV450
Of these 5 fans, each size will share the same housing and parts… EXCEPT the 315. Check the housing size and Impeller measurements to confirm.
Parts for GSV RSV 200-450 Fans with Backward Curved Impellers
| Enervex Fan GSV200-450 RSV200-450 | GSV200 RSV200 | GSV250 RSV250 | GSV315 | RSV315 | GSV400 RSV400 | GSV450 RSV450 | PART VIEW |
|---|---|---|---|---|---|---|---|
| Motor Type | J4 | Q4 | V4 | V4 | 1HP | 2HP |  |
| Motor Number | 1200284 J4 651.0503.1200 | 1200329 Q4 651.0504.1200 | 1200795 V4 650.0503.1200 | 1200795 V4 650.0503.1200 | 1200803 654.0401.2200 | 1200788 654.0402.2200 | |
| Impeller OD | 15 3/8 11 1/4 ID | 15 3/8 9 3/4 ID |  |
||||
| Impeller Number | 1100079 605.0400.0010 | 1100194 605.0600.0010 | 1100725 633.0800.0010 | 1100709 605.0800.0010 | 1100811 605.1000.0010 | 1105607 605.1200.0010 | |
| Capacitor | 12MFD | 16MFD | 30MFD | 30MFD |  |
||
| Capacitor Number | 2000842 604.0400.0064 | 2000959 604.0600.0064 | 2000957 604.0800.0064 | 2000957 604.0800.0064 | |||
| Impeller Seat ID | N/A Part of Bottom Housing | 9 5/8 |  |
||||
| Impeller Seat Part Number | 605.0400.0007 | 605.0600.0007 | 605.0800.0007 | 605.1200.0004 | 604.1200.0007 | ||
| Motor Mount |  |
||||||
| Motor Mount Number | 604.0400.0002 | 604.0400.0002 | 633.0800.0002 | 604.0400.0002 | 604.1000.0002 | 605.1200.0002 |
Discontinued motors and parts… before 2009 some motors were updated to a thicker shaft with a larger bore for the corresponding wheel.
With the effected motor shaft upgrade from 14mm ( 1/2″ ) to 19mm ( 3/4″ ) it is advised to check that the housing measurements, axial/impeller and insert/impeller seat be confirmed with the replacement parts above.
| DISCONTINUED MOTOR | REPLACEMENT MOTOR | EFFECTED FAN | CORRESPONDING IMPELLER |
|---|---|---|---|
| 1200297 V4 RES1200297 | 1200795 V4 RES1200795 | GSV315 | 1100725 633.0800.0010 |
| 1200297 V4 RES1200297 | 1200795 V4 RES1200795 | RSV315 | 1100709 605.0800.0010 |
| 1200457 1HP RES1200457 | 1200803 654.0401.2200 | GSV400 RSV400 | 1100811 605.1000.0010 |